VINTEX
Technical data
Vintex 3x3
- Weight: 300 GR
- Width: 200 cm
- color: transparent
- piece meters: 50 m
- composition: TRANSPARENT PVC WITH INNER FABRIC
- thickness: 0.30 mm
Translucent PVC with a reinforced polyester inner fabric, which gives it greater strength, versatility and dimensional stability, making it ideal for industrial uses. It also has a high resistance to UV rays, making it ideal for outdoor use.
Inner polyester fabric for increased strength
Easy maintenance
UV resistance
Free of aphthalates
REACH Certificate
Waterproof
Respectful with
the environment
Sound insulating
Sides Balcony
Market stall
Cases
Bags
Camping
Agriculture
Industrial bags
Tips for a correct maintenance of the material and maximize the durability of our products.
Regular cleaning
Regular cleaning of the installation with NON-abrasive and PH neutral products. This will avoid removing the protective layer.
Water use
If it is necessary to apply water for cleaning, this should be done at low pressure.
Water temperature
High temperature water should be avoided, as this will damage the protective finish of the different products.
Drying
After cleaning, let it dry completely; if it is stored in humid conditions, it can facilitate the appearance of mildew.
Storage
If the material is to be stored, ensure that it is in a dry environment and away from heat sources and chemicals.
Vintex Mini 3x3
- Weight: 500 GR
- Width: 150 cm
- color: transparent
- piece meters: 50 m
- composition: TRANSPARENT PVC WITH INNER FABRIC
- thickness: 0.50 mm
With greater resistance due to its internal mesh reinforcement. The frame is smaller than that of the Vintex 3×3.
Inner polyester fabric for increased strength
Easy maintenance
UV resistance
Free of aphthalates
REACH Certificate
Waterproof
Respectful with
the environment
Sound insulating
Sides Balcony
Market stall
Cases
Bags
Camping
Agriculture
Industrial bags
Tips for a correct maintenance of the material and maximize the durability of our products.
Regular cleaning
Regular cleaning of the installation with NON-abrasive and PH neutral products. This will avoid removing the protective layer.
Water use
If it is necessary to apply water for cleaning, this should be done at low pressure.
Water temperature
High temperature water should be avoided, as this will damage the protective finish of the different products.
Drying
After cleaning, let it dry completely; if it is stored in humid conditions, it can facilitate the appearance of mildew.
Storage
If the material is to be stored, ensure that it is in a dry environment and away from heat sources and chemicals.